-- Dataref index (zone):

Annunciator or conditional text: - Enter the data Value (one number) or data value Range (2 comma-separated numbers). Optional - the value/range ​​in which it blinks:

---

Value (or range):         Optional: Blink Value/Range:

---

When this condition is TRUE:
RangeValue

Value Range for condition to be TRUE:
- min   - max

Number of modes:

- Enter number of positions

- Number of modes for this Selector button

Options:
A continuous graph is displayed
All LEDs OFF when value is Minimal

Blink when armed

Blink when ON
(Optional) Stop blinking after this number of blinks
Leave this field blank for continuous blinking.

Stepper type: X27.x / driver: VID6606, VID6608, etc. X27.x / driver: A3967 (set to quarter step!) 28BYJ-48 / driver: A3967 (set to full step!)
Has initial position sensor:

Select module/driver type used for this display:

MAX7219 Driver, up to 8 digits
TM1637 Driver, 6-digit Module       | 4-digit Module
DM13A (or similar) LED Drivers
74HC595 Shift Registers       | Common Anode     | Mirrored

Shift position, from the right side of the display (default - no shift)

Display type:
Note: character LCD with standard 6800 4/8-bit Parallel interface:

16x2, 16x4, 20x2, 24x2, 40x2 LCD
20x2 character OLED Display (NOTE: select 6800 4-bit parallel interface!)

LCD Line Number (from 0) Position in line (from 0)

---

OPTIONS: Associated Brigtness Knob, Power Bus

  | Independent of "Avionic Master" bus

---

None BRT Knob 0 BRT Knob 1 BRT Knob 2 BRT Knob 3 BRT Knob 4 BRT Knob 5 BRT Knob 6 BRT Knob 7 BRT Knob 8 BRT Knob 9 - HCSCI Brightness Control Knob number

---

Electrical Bus number for this display and optional minimum BUS voltage on that the display is turned OFF: HCSCI Default Bus #1 Bus #2 Bus #3 Bus #4 -- min.V =

---

OPTION: related text for this parameter value:

Text before value     Text after value

---

(text+value cannot exceed the display area!)

Text: