|->
<-|
<-|
<-|->
CONNECT:
<=======
CONNECT:
CONNECT:
Servo board
| 0 | |
|---|---|
| 1 | |
| 2 | |
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 | |
| 9 | |
| 10 | |
| 11 | |
| 12 | |
| 13 | |
| 14 | |
| 15 | |
| 16 | |
| 17 | |
| 18 | |
| 19 | |
| 20 | |
| 21 | |
| 22 | |
| 23 | |
| 24 | |
| 25 | |
| 26 | |
| 27 | |
| 28 | |
| 29 | |
| 30 | |
| 31 | |
| 32 |
Stepper board
| 2 | |
|---|---|
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 | |
| 9 | |
| 10 | |
| 11 | |
| 12 | |
| 13 | |
| 14 | |
| 15 | |
| 16 | |
| 17 | |
| 18 | |
| 19 | |
| (20) | |
| (21) |
<<--
| 2 | |
|---|---|
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 | |
| 9 | |
| 10 | |
| 11 | |
| 12 |
Add BRT knob to the LCD board.
Key-Matrix board
| 2 | |
|---|---|
| 3 | |
| 4 | |
| 5 | |
| 6 | |
| 7 | |
| 8 | |
| 9 | |
| 10 | |
| 11 | |
| 12 |
This pin is already assigned
Mode Group Selector:
Options
-- Dataref index (zone):
TM1637 Driver, 6-digit Module | 4-digit Module
DM13A (or similar) LED Drivers
74HC595 Shift Registers | Common Anode | Mirrored
20x2 character OLED Display (NOTE: select 6800 4-bit parallel interface!)
- SimVimX Brightness Control Knob number
Default brightness
Electrical Bus number for this display and optional minimum BUS voltage on that the display is turned OFF: -- min.V =
(text+value cannot exceed the display area!)
RealSimControl / SimVim / SimVimX 2012 - 2022
Annunciator or conditional text: - Enter the data Value (one number) or data value Range (2 comma-separated numbers). Optional - the value/range in which it blinks:
Value (or range): Optional: Blink Value/Range:
Value (or range): Optional: Blink Value/Range:
When this condition is TRUE:
RangeValue
RangeValue
Value:
Value Range for condition to be TRUE:
- min - max
- min - max
Number of modes:
- Enter number of positions
- Number of modes for this Selector button
Options:
A continuous graph is displayed
All LEDs OFF when value is Minimal
A continuous graph is displayed
All LEDs OFF when value is Minimal
Blink when armed
Blink when ON
(Optional) Stop blinking after this number of blinks
Leave this field blank for continuous blinking.
(Optional) Stop blinking after this number of blinks
Leave this field blank for continuous blinking.
Stepper type:
Has initial position sensor:
Has initial position sensor:
Select module/driver type used for this display:
MAX7219 Driver, up to 8 digitsTM1637 Driver, 6-digit Module | 4-digit Module
DM13A (or similar) LED Drivers
74HC595 Shift Registers | Common Anode | Mirrored
Shift position, from the right side of the display (default - no shift)
Electrical Bus number for this gauge and optional minimum BUS voltage required for it to work:
-- min.V =
Display type:
Note: character LCD with standard 6800 4/8-bit Parallel interface:
20x2 character OLED Display (NOTE: select 6800 4-bit parallel interface!)
LCD Line Number (from 0)
Position in line (from 0)
OPTIONS: Associated Brigtness Knob, Power Bus
| Independent of "Avionic Master" bus- SimVimX Brightness Control Knob number
Default brightness
Electrical Bus number for this display and optional minimum BUS voltage on that the display is turned OFF: -- min.V =
OPTION: related text for this parameter value:
Text before value Text after value(text+value cannot exceed the display area!)
Text:
Options:
Select Type
Parameter assigned
RealSimControl / SimVim / SimVimX 2012 - 2022