DataRef for the switch cover guard position ("open" value only)

DataRef for the switch position check

Dataref optional parameters

Option: the LED used under the same [ ] keyword

This parameter keyword is used for both input and output, even if the input uses commands. You can assign the LED adding a dataref indicating the switch position or system state for this parameter.

Optional: alternate text displayed on "conditional" dataref value

This SimVimX parameter has preassigned display format in SimVimX functions accordingly with device type. Optionally, you can add the alternate data for specific plane as a text displayed on condition. Enter the text symbols and the "conditional" dataref with two values, for example 0,1 ( 0 for main data and 1 for the alternate text).

This parameter is not assigned in the I/O configuration section. You can delete it from the conversion list, or assign it in the configurator.

Guards / Start-Up list (edit)

Override system/device types for this plane

Some systems/devices that are default or set in the configurator can be overridden when a specific plane model is loaded.

As example, the Electric "Prop Heat" system can be selected in general configuration for all planes, but reassigned here as "TKS de-ice" for a specific planes.

When the plane starts the appropriate X-Plane TKS de-ice commands will be used for this plane instead of the electric system.