RSC Home / Download CONFIGURATOR

Home

SimVimX Project

Installation

Archive / History

TERMS Of Use

System Structure

I/O Extensios

USB / LAN


Support / Subscribe on Patreon (or Boosty)

Your support/donation is very important for the development of the project, besides, you can get more personalized technical support, advice, access the aircraft conversion file (see this list), get beta versions or modified firmware versions (if available or upon request).

RSC / SimVimX Configuration


CONFIGURATOR - I/O configuration tool (also, you can use the link at the right side of the header)
How it works, - How the system is organazed, I/O data Configuration

Configuration guide - How to use the config tool, cfg file structure
RSC Planes Conversion - Embedded conversions for custom aircraft models

Reference Information

X-Plane Data - X-Plane DataRefs and Commands
Custom Data - Custom Data and your "hardware" cockpit

SimVimPanel - Instrument Panel Simulator for X-Plane


 <== Program Overview / DOWNLOAD

Hardware

Dimentions

Instruments Set


Full Panel Modules

Generig Six

Robin DR400

Cessna 210

Cessna 172

Baron 58

Piper PA-44

King Air B200


SimVimPanel Modules (single instruments and panel parts)

Radio Stack

Autopilot

EOAP

Clock

EMS / VEMD

EFIS 84/85

FMS CDU


Work in progress and planned panels

EFD 1000

KingAir Ann

Dash 8 Q400

Diamond DA-20

Boeing 737

SimVimPanel - Robin DR400

Download modules:

ModuleLast UpdatedOptimal LCD sizeNotes
Robin DR40030 July 202115-18" wide

This SimVim module represents a typical DR400 main panel configuration and cut-outs template for your cover panel:


On-screen inputs supported for all instruments with encoders and timer buttons.

Included instruments:

  • Airspeed
  • Artificial horizon
  • Altimeter
  • Turn/slip indicator
  • Horizontal situation indicator
  • Vertical speed indicator
  • VOR - horizontal
  • Chronometer
  • ADF Indicator


This panel is configured to use with 18.5" LCD monitor in full-screen, all instruments have a real sizes on this screen (1,125" bezels).

Use the cut-outs template for the cover plate - make 80mm holes (light-gray circle) if you will insert your bezels into the cover plate, or 72mm (dark-grey circles) if you will glue the bezels on top of the cover plate:






RealSimControl / SimVim / SimVimX 2012 - 2022